You are here: Home » Products » Air Filtration » Needle Felt Media » Polyester (PE) » Polyester (PE) Needle Felts

Product Category

Share to:

Polyester (PE) Needle Felts

Using the highest quality fiber materials and world-class needling techniques and equipment, HL Filter manufactures a wide range of Poylester PE needle punched felts with high dust-holding capacity and good air permeability. The Polyester media most commonly used and cost effective filter felt in modern pulse jet style baghouses. It is frequently used as a mixed felt of PE/PAN.

Bulk Roll Goods: weight, thickness, density, roll width, and roll length are customized at your request.

Quantity:

Most versatile, cost effective, and widely used
 

With good air permeability and also can be adjusted by customers' specific request 
 

With high tensile strength and low tensile elongation 
 

Provides an economical combination of good resistance to chemicals and excellent abrasion resistance.
 

Good for dry heat applications and superior to other synthetics with the exception of Nomex (Aramid) and PFTE (Teflon) in this matter.
 

Good choice for moist heat and subject to hydrolytic degradation under certain circumstances
 

Good resistance to most mineral and organic acids except high concentration of nitric, sulfuric, and carbolic acids
 

Good resistance to weak alkalis and moderate resistance to strong alkalis at low temperature.
 

Not recommend for high concentration of strong alkalis at high temperatures.
 

Continuous operating temperature 265℉ (130°C)

Fiber Materials PE-Polyester 
Scrim Polyester 
Standard Finish Options
(Special surface treatments available)
Heat set, singed, glazed, oil-repellent and waterproof, PTFE membrane
Weight
oz/yd² (g/m2)
11.80-17.70 (400-600) 

Thickness
   Inch (mm)
0.063-0.091 (1.6-2.3) 
Air Permeability
 CFM@ ½" W.G125PA
 (m³/m².min@200PA )
25-33 (12-16) 
  Tensile Strength
 lb/in (N/5CM)
Warp MD  126 (1100)
Weft CD 148 (1300)
Tensile Elongation (%) Warp MD  ≤25
Weft CD ≤40
Thermal Shrinkage (%) at max continuous temp. Warp MD  ≤1
Weft CD ≤1.5
Max. Operating Temperature  oF (oC) Continuous 265 (130) 
Surge 302 (150) 
The data are based on laboratory conditions. 
Testing based on specific operating conditions of each installation is recommended.

Power Generation
 

Powder Coating & Sand Blasting
 

Paper, Pulp & Woodworking
 

Paints & Pigments
 

Cement, Mining & Rock Products
 

Asphalt & Aggregate
 

Chemicals & Pharmaceuticals
 

Metals & Foundry

 

Food & Beverages
 

Custom OEM Applications

Customized per order

  2015  HL Filter USA.LLC.   ∣  All Rights Reserved  ∣  Terms    ∣  Privacy Policy