You are here: Home » Products » Liquid Filtration » Multi-layer Filter Bags » High Efficiency Filter Bags » Multi Layer High Efficiency Filter Bags

Product Category

Share to:

Multi Layer High Efficiency Filter Bags

The high density of small diameter fibers compared to that of a standard needle felt enhances particle retention, leading to superior, highly effective and efficient filtration. The fully welded, multi-layered construction provides an exceptional depth of filter media and long service life. The bags are used for those critical applications when highly efficient operation and effective particle holding capacity is required.

All seams are fully welded, producing strong, reliable joints with no by-pass or loose sewing thread. Seams are both strong and flexible, allowing the filter bag to form to the restrainer basket. The seam edges are heat sealed, eliminating possible loose fibers. This results in a filter bag with durable performance for the most demanding applications.

Quantity:

Material: polypropylene (PP) microfibers

Micron Ratings: 0.5-100μ

Made of polypropylene superfine fibers, which have more chemical stability and capability of capturing particles and absorbing hydrocarbons (oil)

Special pore gradient multilayer structure consists of up to 12 layers including a coarse pre-filter layer, a complex arrangement of final filter layers, and an outer cover providing a long operational life and absolute filtration

A coarse melt blown pre-filter layer is present, to give high particle holding capacities and protection to the finer filtration layers, prolonging the filter bag’s operational life

A cover layer virtually eliminates any downstream fiber migration.

Large filtration area

Broad range of chemical compatibility

High performance and lower cost alternative to cartridge filters

Welded seam construction eliminates liquid bypass

Optimum efficiency up to 99.9%

 

 Material: polypropylene microfibers

Micron Ratings: 0.5-100μ

Bag Size #1 and #2

Collar Type: PP plastic ring/flange, stainless steel

Cover: Polypropylene spun bonded or mesh

Construction: w/w/w fully welded, no by-pass (or s/w/w)

 

Food and Beverage

Pharmaceutical 

Micro-electronics 

Chemical 

Ink and Paints 

Water Treatment 

Filtering amines in the oil industry

Custom OEM Applications

 
How to order a felt filter bag




1) Material 2) Micron Rating 3) Finish 4) Size 5) Ring 6) Ring/side/bottom Construction
Polypropylene microfibers 0.5-100μ PL-Plain  #1 S- Carbon Steel  WWW- Fully Welded 


HS-Heat Set #2 SS-Stainless Steel SWW 


MS-Special/modified
P-Polypro PP Flange




E-Polyester PE Flange




PP-Polypro Ring




PE-Polyester Ring




MS-Modified/Special 7) Options





HS-Handle Strap (additional handle, same media)





A-Automotive (bottom and side seams inside bag)





SR-Special request


Other micron ratings, other sizes, and special design are available on request
 

Standard Bag Size #1 #2 #3 #4
Surface Area  2.6 (0.24) 5.2 (0.48) 0.9 (0.08) 1.7 (0.16)
ft2 (m2)
Volume 2.1 (7.9) 4.5 (17.0)
0.7 (2.7)
U.S gal (liter) 0.37 (1.4)
Max. Flow Rate 90 (20) 180 (40) 26 (6) 53 (12)
GPM (m3/h) 
Bag Diameter 7.0 (180) 7.0 (180) 4.0 (105) 4.0 (105)
inch (mm)
Bag Length 17.0/430 32.0/810 9.0/230 15.0/380
Inch (mm)
Other Bag Size Available upon request
  2015  HL Filter USA.LLC.   ∣  All Rights Reserved  ∣  Terms    ∣  Privacy Policy