You are here: Home » Products » Air Filtration » Dust Filter Bags » Anti-static Filter Bag » Anti-static Dust Filter Bags

Product Category

Share to:

Anti-static Dust Filter Bags

Using the finest fiber material possible in the market and high-speed modern needling equipment, we manufacture our own filter media for our dust filter bags guaranteeing the highest quality, reliability, and consistency

A wide range of surface finishes and chemical treatments that aid in the collection and release of the dust from the bags

Ultrasonic welded seam for increased efficiency and reinforced mechanical strength

Our laboratories are equipped with sophisticated testing equipment used to analyze and evaluate all aspects of your process and application

Custom fabricated bag designs to meet the unique needs of your bag house installation

Has media characteristics of the blended fibers

Excellent Anti-Abrasion

Anti-static filter media (use when static dissipation is required)
Stainless steel scrim supported felt A woven scrim comprised partially of stainless steel yarns
Stainless steel fiber blend felt Use of stainless steel fibers blended with standard fibers
Epitropic fiber blend felt A blend of standard and epitropic (carbonized) fibers

Continuous operating temperature depending on the blended fibers

Antistatic Composite Felts:

- Polyester Antistatic Needle Felts

- Acrylic Antistatic Needle Felts

- Aramid Antistatic Needle Felt

- PTFE Antistatic Needle Felt
- Customized Antistatic Needle Felts

Fiber Materials Polyester + Stainless steel Polyester
Scrim Polyester + Stainless steel Polyester + Stainless steel (stripe or grid)
Standard Finishes
(Special surface treatments available)
Heat Set, Singed, Glazed, PTFE membrane, Water and oil proof
Weight oz/yd² (g/m2) 11.80-17.70 (400-600)  11.80-17.70 (400-600) 

Thickness  Inch (mm)
0.063-0.091 (1.6-2.3)  0.063-0.091 (1.6-2.3) 
Air Permeability
 CFM@ ½" W.G125PA
 (m³/m².min@200PA )
25-33 (12-16)  25-33 (12-16) 
  Tensile Strength
 lb/in (N/5CM)
Warp MD  126 (1100) 126 (1100)
Weft CD 148 (1300) 148 (1300)
Tensile Elongation (%) Warp MD  ≤25 ≤25
Weft CD ≤40 ≤40
Thermal Shrinkage (%) at max continuous temp. Warp MD  ≤1 ≤1
Weft CD ≤1.5 ≤1.5
Surface electric resistance(Ω) <10E5 <10E5
Volume electric resistance(Ω) <10E5 <10E5
Friction voltage(V) <500 <500
surface density(uc/m2) <7 <7
Max. Operating Temperature  oF (oC) Continuous 265 (130)  265 (130) 
Surge 302 (150)  302 (150) 
The data are based on laboratory conditions. 
Testing based on specific operating conditions of each installation is recommended.

Use when static dissipation is required

Comprehensive selection of bag sizes:

Diameter: 4 5/8” – 113⁄4”

Length: 12” – 144”

Customized sizes are also available

  2015  HL Filter USA.LLC.   ∣  All Rights Reserved  ∣  Terms    ∣  Privacy Policy